
Model 420LX Cage and Rack Washer
The LYNX Model 420LX Cage and Rack Washer is a heavy duty, large capacity, hydro-spray washer designed for thorough, efficient cleaning of cages, racks, debris pans, and miscellaneous items used in the care of laboratory animals. Pit mounting is standard.
- Modular Construction
- Knock-down Shipment
- Oscillating Spray Jet System
- Personnel Safety Features
- Micro-computer Control System with Modem Package
- Automatic Ten-phase Treatment Cycle
- Automatic Self-cleaning Screen
- Temperature Guarantee
- Insulated Construction
- Incoming Utility Gauges
- Interior Illumination
- Stainless Steel Recirculation Piping and Components
- Two (2) Year Parts/Labor Warranty
Compartment: 46" wide x 85" high x 141" long
Overall Unit: 84" wide x 104" high x 149" long
Note: Washer can be designed to any size to meet new or existing applications. (Overall size may vary upon options chosen)
- All Stainless Steel Construction
- Automatic Water Level Control
- 15 HP Treatment Pump
- Stainless Steel Steam Coil Heating
- Touch Screen Operator Interface
- Programmable Cycles
- Direct Reading Pump Pressure Gauge
- Double-pane Glass Window
- Floor Ramps
- Modular Walls
- Barrier Wall Flange Assembly
- Bottle Wash Cart
- Universal Cage Wash Cart
- LYNX OPTI-Wash™ System
- Pit or Floor Mounted
- Right or Left Hand Services
- Re-usable Throwaway Alkaline and/or Acid Tanks
- House Hot Water Heat Exchanger
- Low Steam Pressure Package
- Integral Data Collection System
- LYNX Smart-Cool™ System
- Automatic Damper
- Pass-thru Unit
- Drain Discharge Cool Down/Tank
- Feeder Bottle Washing System
- Pan Washing
- Automatic Watering Rack Flush System
- Pass-thru Door Interlock System
- Split Base for Special Entry
- Air Compressor
- Exhaust Fan
- Strip Chart Printer
- Electric Heat System
- Utility Enclosure Panels
- Detergent Dispensing Systems
- pH Neutralization System
- Seismic Tie Down
Electrical | 3-60-208/230/480 V |
16 HP |
|
Steam | 2" NTP |
45-80 PSI |
Dynamic ± 5 PSI, 800 #/Hr Flow Rate, (1200 #/Hr with optional HW Heat Exchanger) |
Hot Water | 1½" NPT | 35 PSI |
50 GPM @ 140°F ± 5°F (60 Gallon Sump Capacity) |
Drain | 12"x12" Floor Sink with 4" Floor Drain (Minimum) | 180 GPM |
Flow Rate @ 200°F |
Vent | 12" ID Duct | 750 CFM | Saturated Vapor @ 190°F |
Air | ½" NPT | 100 PSI | 6 CFM Flow Rate |
Cold Water* | 1½" NPT | 35 PSI | 75 GPM @ 50°F ± 5°F |
*Cold Water – Required if drain discharge cool down package is ordered